Tektronix AWG710B User Manual download pdf (Page 171)

100

101

The Setup Menu Screen

AWG710&AWG710B Arbitrary Waveform Generator User Manual 3-41

Clock Out

The instrument also outputs the internal clock signal to the rear panel VCO OUT

(1/4 CLOCK OUT : AWG710) connector. Table 3-5 describes the VCO OUT (1/4

CLOCK OUT : AWG710) signal timing as it relates to the active Run Mode.

1/4 Clock Out (AWG710

only)

The instrument outputs the internal clock signal to the rear panel 1/4 CLOCK OUT

connector (see Figure 3-3).

Figure 3-3: 1/4 CLOCK OUT output format

Three connection methods are available. Refer to Figure 3-4.

NOTE. When you push the RUN button, the instrument outputs a pulse signal for a

short period of time on the VCO OUT (1/4 CLOCK OUT : AWG710)connector (not

related to the clock signal). This signal is generated for the instrument internal

setup.

Table 3-5: Clock signal output timing

Run modes Timing

Continuous The clock signal is always output when the RUN LED on the front–panel is on.

Triggered The clock signal is always output when a waveform is being output. When the

instrument waits for a trigger event, no clock output is provided.

Gated The clock signal is always output when the RUN LED on the front–panel is on.

Enhanced The clock signal is always output except the instrument is in the trigger wait state.

MC100EL57

1/4 CLOCK OUT

47 Ω

51 Ω

–2 V

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 579 580

Comments to this Manuals

No comments

Tektronix AWG710B User Manual Page 171

Comments to this Manuals

Related products and manuals for Power generators Tektronix AWG710B